50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.Owens Corning VentSure Sky Runner LTE is a 12 in x 30 ft rolled ridge vent for asphalt-shingle roof ventilation systems. It is for contractors balancing attic exhaust at the ridge with adequate soffit intake and the correct ventilation slot.
One roll provides 30 linear ft of ridge vent before end cuts and layout waste. Calculate ridge length and ventilation requirement before ordering.
Use as a ridge exhaust vent under compatible hip-and-ridge shingles. Do NOT install without required intake ventilation, without the proper ridge slot, or as a substitute for static box vents where the roof design calls for another ventilation method.
One roll covers 30 linear ft before cuts and waste. Measure the vented ridge length, then confirm the net free vent area calculation and intake balance.
The candidate record lists a 12 in x 30 ft roll. Center it over the prepared ridge slot according to the Owens Corning installation instructions.
Owens Corning ridge vent instructions describe cutting slots on each side of the ridge and leaving uncut space near rake edges. The exact slot depends on roof framing and the product instructions.
Yes. Ridge exhaust only works correctly with balanced intake. Owens Corning instructions emphasize that soffit intake net free area should be at least equal to ridge exhaust area.
Not specified by the manufacturer in the candidate record. Check the box contents for the exact roll or ask the Pro Desk before ordering if fasteners are required on the same purchase order.
Cutting ridge slots and installing ridge vents is fall-hazard roof work. Wear eye protection when cutting sheathing and follow roof fall-protection practices.
A solid ventilation SKU because the buyer needs linear-foot coverage, ridge-slot guidance, and intake/exhaust balance. The FAQ should stop bad installs, not just repeat easy roll out.
